Other Control Modules

VE99 Data Converter connects the VE bus to a PC using a COM port. It has control lamps for the status of the COM port (no light = no COM port, slowly flashing = COM port detected but port is not engaged, on with fast flashing = COM port engaged and data activity). It also has Line lamps for the two data lines in the VE bus.

VE99 USB Data Converter connects the VE bus to a PC using a USB port. It has control lamps for the status of the USB port (no light = no USB port). The PC Data lamp flashes when data goes to or from the PC. It also has Line lamps for the two data lines in the VE bus.

VE245 Analogue Output outputs a control signal zero to ten Volt. It converts digital control data at the VE bus to analogue control voltage. It is ideal for reusing components during refurbishing. It is mandatory controlling EC fans. A control lamp shows the output level. The control lamps Line, Send and Error display the condition of the VE bus.

 

Til toppen af VengSystem Ventilation