Control of Fan Speed

VE171 Single Phase Motor Module controls and monitors a single phase motor or fan. It has a free change-over relay 5 Amp 230 Vac and electronically surveillance of the motor current up to 3 Amps. Push buttons AUT, OFF and ON are located at the front. A control lamp shows when the relay is on. The control lamps Line, Send and Error display the condition of the VE bus.

 

 

 

VE173 Three-Phase Motor Module is a complete module to control and monitor three-phase motors and fans. It has a three-phase relay with max. pre-fuse 20 Amp and electronically surveillance of all motor currents up to 3 Amps. Push buttons AUT, OFF and ON are located at the front. A control lamp shows when the relay is on. The control lamps Line, Send and Error display the condition of the VE bus.
VE173 handles motors from 0.5 HP to 2.0 HP (0.37 kW to 1.5 kW) and is very suited driving belt fans. You save the expensive centralized distribution board. 

VE181 Phase Controller Module is a triac controller designed to control fan speed of fans designed for voltage (triac) regulation 230 Vac. Push buttons AUT, OFF and ON are located at the front. The control lamps Line, Send and Error display the condition of the VE bus. It comes with three versions 1.5, 3.0 and 5.0 Amp.

ve181

 

 

 

 

VE184 Fan Speed Controller designed to control the speed of 24 Volt fans for lorries. It also controls the VE60 cooling pump for high pressure cooling of farm animal transports. Push buttons AUT, OFF and ON are located at the front. A control lamp shows output level. The control lamps Line, Send and Error display the condition of the VE bus. It is available for 10 and 15 Amp motor current. It is overload and short-circuits proof.

VE184 is a perfect controller for low volt feeding systems as moveable sheds for free range hens.

ve184

Til toppen af VengSystem Ventilation