Control of flaps and shutters in Air Intake and Air Outlet

VE165 Actuator Module controls actuators like LA12, LA34 and LA35 with built-in potentiometer. They come with 0.2, 1.0, 2.0, 4.0 and 7.0 Amp motor current. Push buttons AUT, Close, Stop, Open are located at the front. Working range can easily be defined by holding the Close or Open button together with the Stop button. Output voltage to the motor can be set and read. Maximum motor current can be set and read. Potentiometer voltage can be read, zero Volt at closed, 5 Volt at open. The control lamps Line, Send and Error display the condition of the VE bus.

Adding the module VE165-230 a 230 Vac motor with potentiometer can be operated. Adding two three-phase relays a three-phase motor with potentiometer can be operated.

ve165

 

 

 

 

 

 

 

LA12 Actuator is a linear actuator with 100 mm stroke and potentiometer. It pulls wall, ceiling and roof vents. Maximum load 75 kg.
Accessories are extension of stroke to 150, 200, 250 and 300 mm. VE165-020 drives it.

la12

 

 

 

V12 Swivel Shutter Actuator operates a swivel shutter in an air outlet. The shutter turns 90°. VE136-010 or VE165-010 drives it. 

 

LA34 Actuator is a linear actuator with 250 mm stroke and potentiometer. It pulls wall, ceiling, roof vents and curtains. Maximum load 1000 kg.
VE165-020, VE165-040 or VE165-070 drives it.

la34

 

 

 

 

LA35 Actuator is a linear actuator with 600 mm stroke and electronically potentiometer. It pulls canopies. Maximum load 600 kg. Supplementing with potentiometer converter VE165-200 it also pulls vents and curtains
VE165-020, VE165-040 or VE165-070 drives it.

 

V8 and V24 actuator operates valves for water and hot water. VE165-001 pulls it.

jowenta8nm

 

Til toppen af VengSystem Ventilation